Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may want to reset your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected issues. Fortunately, resetting your Holosun is a easy process that can be performed in just a few procedures.

• First ensuring your red dot sight is activated.
• Locate the small button for reset on the rear of the sight.
• Employ a small object to press and hold the reset lever for approximately 7 seconds.
• Release the lever and your Holosun EPS Carry Red Dot sight will reboot.
• The red dot sight should now be reverted to its factory settings.

Reset Your Holosun EPS Carry Red Dot toward Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it to its factory configuration is a breeze. First, find the tiny button on the rear of your optic. Then, press and hold it for around five seconds until you see a brief flash. Your Holosun EPS Carry is now reset to its factory settings, ready for precise aiming.

Bring Your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:

• Press and hold the power button for approximately 7 seconds.
• An indicator will flash, indicating that the reset is in progress.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and confirm your sight's functionality. If you encounter any further troubles, don't hesitate to reach out to their technical assistance.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

• Beginning with, Energize your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, press the power button once.
• A message will show a confirmation prompt indicating that the reset process is initiated.
• Permit the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings How to factory reset holosun eps carry red dot Restored to their default values.

Reset your Holosun EPS Carry through a Factory Original Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the solution. This will restore your sight to its initial settings, clearing any altered configurations you've made. To accomplish this reset, follow these straightforward steps:

• To begin, find the reset button on your EPS Carry.
• Next, engage a small object, like a pen tip, to push the reset switch.
• As you keep the reset lever pressed, activate your EPS Carry.
• The sight will blink a message indicating that the reset is successful.

Once the reset is finished, your EPS Carry will be back to its factory settings.

Report this wiki page